How to re-oil window frames with Hybrid Wood ProtectorUpdated 2 months ago
Consult the TDS prior to using Hybrid Wood Protector.
Materials needed
- Exterior Wood Cleaner
- Hybrid Wood Protector
- Accelerator (Part B)
- Paint can opener
- Mixing container
- Stir stick
- Firm bristle paint brush
- Supply of clean terry cloths/towel
- Nitrile gloves
- Water filled metal can with a lid for safe disposal of oil-contaminated rags and pads.
Video
Application process
Preparation
- Clean the wood surface thoroughly with Exterior Wood Cleaner. For lightly weathered surfaces, dilute 1-part cleaner with 2-parts clean water. For medium to heavily weathered surfaces, dilute 1-part cleaner to 1-part clean water.
Application
- Stir the Hybrid Wood Protector thoroughly until a consistent mixture is obtained.
- Apply a layer of Hybrid Wood Protector with a firm bristle paint brush.
- Leave the oil to react for 10 minutes. Then smooth the surface again with the same brush (without applying additional product).
- After 5 minutes, gently wipe off the surface with a lint-free cloth to remove traces of excess oil until it appears even.
- Let dry for about 24 hours. Complete curing takes place after 7 days.
Clean up
Caution
Rags saturated in oil are combustible and require proper disposal. Here are some oily rags safety tips from the NFPA.
Maintenance
- Do a visual check-up after one year, right after the first winter season. As needed, touch up the Hybrid Wood Protector in the original color where color has faded.
- After 2-3 years, depending on the wood type, color, and location, you will need to re-oil the whole surface but you'll never have to sand again.
Tips
To set you up for success, please review the Hybrid Wood Protector tips.