How to apply Hybrid Wood Protector to decking
Step-by-step instructions on how to apply Rubio Monocoat Hybrid Wood Protector to wood decking.
All articles
Hybrid Wood Protector
Molecular bonding hardwax oil wood finish that requires one single application to provide color (if desired) and protection. No peeling, no flaking.
How to apply Hybrid Wood Protector to siding
Step-by-step instructions on how to apply Rubio Monocoat Hybrid Wood Protector on wood siding.
How to apply Hybrid Wood Protector to doors
Step-by-step instructions on how to apply Rubio Monocoat Hybrid Wood Protector to wood doors.
How to apply Hybrid Wood Protector to outdoor furniture
Step-by-step instructions on how to apply Rubio Monocoat Hybrid Wood Protector to outdoor wood furniture.
How to re-oil window frames with Hybrid Wood Protector
Step-by-step instructions on how to re-oil window frames finished with Rubio Monocoat Hybrid Wood Protector.
How to re-oil siding with Hybrid Wood Protector
Step-by-step instructions on how to re-oil siding finished with Rubio Monocoat Hybrid Wood Protector.
Hybrid Wood Protector tips
Tips, tricks, and best practices when using Rubio Monocoat Hybrid Wood Protector.
Hybrid Wood Protector coverage
Coverage and spread rate information for Hybrid Wood Protector.
Can I use Hybrid Wood Protector for interior purposes?
Yes, Hybrid Wood Protector is good for interior or exterior use (but not for use on interior wood floors or in areas where there is a lot of exposure (like kitchen counters, bathrooms, etc., in those instances we recommend Oil Plus 2C).
What is the ideal temperature to apply Hybrid Wood Protector?
The ideal working temperature for Hybrid Wood Protector is between 50-86°F (10-30°C).
Is Part B (Accelerator) required for Hybrid Wood Protector?
Part B (Accelerator) is recommended but not required to use with Hybrid Wood Protector. Part B (Accelerator) will speed up the drying and curing, and improve the overall performance of Hybrid Wood Protector.
Can I go over Hybrid Wood Protector with DuroGrit?
Yes, you can go over Hybrid Wood Protector with DuroGrit provided the Hybrid Wood Protector layer is in good condition. Otherwise, it is recommended to remove the Hybrid Wood Protector.
Do I need to sand or abrade the surface before applying a maintenance coat of Hybrid Wood Protector?
No, you do not need to sand or abrade the surface before doing a maintenance coat of Hybrid Wood Protector. Before a maintenance coat, clean the wood surface thoroughly with Exterior Wood Cleaner. For lightly weathered surfaces, dilute 1-part...
Do I need to use Exterior Wood Cleaner before applying Hybrid Wood Protector to fresh unexposed lumber?
It is not required to use Exterior Wood Cleaner before applying Hybrid Wood Protector to fresh lumber. A good sanding will suffice.
Does Hybrid Wood Protector work on any wood species?
Yes, Hybrid Wood Protector will work on any wood species.
If I want to change colors after applying Hybrid Wood Protector, can I do a new coat with a different color?
We recommend to do a maintenance coat with the original color of Hybrid Wood Protector. If you choose a different color, the previous color may show through.
How often should I expect to do a maintenance coat of Hybrid Wood Protector?
For decking, steps, and tables/chairs, a maintenance coat of Hybrid Wood Protector is generally needed annually after the initial application. The maintenance coat should be applied before the weather becomes unsuitable (even if it has been less...
What sanding grit is recommended before applying Hybrid Wood Protector?
For exterior furniture, doors, window treatments, vertical surfaces you can sand up to 120 grit. For decking, we recommend a final grit of no higher than 80 grit.
Can I mix colors of Hybrid Wood Protector to create a custom color?
Yes you can mix colors of Hybrid Wood Protector (before applying) to create a custom color.