How to repair color damage on an Oil Plus 2C finished floor.

<h3 id="isPasted">When to renovate</h3><p>A &#x201C;renovation&#x201D; is necessary when color restoration is required. If color restoration is not required, maintenance is done using <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/renew" style=" text-decoration: underline 1px;" title="Renew">Renew</a>.</p><p>For an overview of the care process, please read <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/blogs/blog/caring-for-your-rubio-monocoat-oiled-floor" style=" text-decoration: underline 1px;" title="Caring for your Rubio Monocoat oil finished floor.">caring for your Rubio Monocoat oil finished floor</a>.</p><p>Under normal circumstances, a floor that has been properly cared for should not need a renovation.</p><p>There are a couple cases though, where a renovation is required.</p><ul><li>If cleaning and/or maintenance is neglected, the protective qualities of the finish can become compromised and further use can result in loss of color.</li><li>When the recommended cleaner (<a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/surface-care-spray">Surface Care Spray</a> or properly diluted <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/soap" style=" text-decoration: underline 1px;" title="Rubio Monocoat Soap">Rubio Monocoat Soap</a>) is not used, appearance and performance issues can be expected. Both of these situations will require a &#x201C;renovation&#x201D; application using <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/oil-plus-2c-390ml" style=" text-decoration: underline 1px;" title="Oil Plus 2C">Oil Plus 2C</a> to restore the appearance and protective properties of the floor.</li></ul><h2 id="isPasted">How a renovation works</h2><p>You may be asking yourself, doesn&#x2019;t the <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/pages/technology" style=" text-decoration: underline 1px;" title="Rubio Monocoat Technology">Rubio Monocoat Technology</a>, that prevents lap lines, mean that simply introducing more product will not work because the surface will not accept more product? And you would be correct.</p><p>The trick to the renovation process is a light abrasion that opens the initially applied Oil Plus 2C finish. This means a renovation can be performed without requiring a full-on re-sand. Once abraded and cleaned, apply Oil Plus 2C the same way as an initial <a class="fr-green fr-strong" href="https://help.rubiomonocoatusa.com/en-US/how-to-apply-oil-plus-2c-to-flooring-273137">application</a>.</p><p>During application, only the areas that require color restoration will accept color while the remaining areas will simply be refreshed in appearance and protection.</p><p>Let&#x2019;s take a closer look at the renovation process!</p><p>Consult the <a class="fr-green fr-strong" href="https://cdn.shopify.com/s/files/1/0260/4810/2497/files/Rubio_Monocoat_Oil_Plus_2C_TDS_English.pdf">TDS</a> prior to using Oil Plus 2C.&#xA0;</p><h2 id="materials-needed">Materials needed</h2><ul><li>Easy release painters&#x2019; tape</li><li>Electric floor buffer</li><li>Vacuum</li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/surface-care-spray">Surface Care Spray</a> (or properly diluted <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/soap" style=" text-decoration: underline 1px;" title="Rubio Monocoat Soap">Rubio Monocoat Soap</a>)&#xA0;</li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/raw-wood-cleaner" title="Rubio Monocoat Raw Wood Cleaner">Raw Wood Cleaner</a></li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/oil-plus-2c-1-3l" title="Rubio Monocoat Oil Plus 2C">Oil Plus 2C</a> (in the original applied color)</li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/wide-lip-can-opener" title="Rubio Monocoat Can Opener">Paint can opener</a></li><li>Mixing container</li><li>Stir stick</li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/applicator-set" title="Rubio Monocoat Applicator Set">Applicator Set</a></li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/red-applicator-pad">Red Applicator Pad</a></li><li>Supply of clean terry cloths/towel</li><li id="isPasted">Maroon buffing pads (ScotchBrite material in 240-320 grit)</li><li>Thick white buffer pads</li><li>Electric floor buffer</li><li>Nitrile Gloves</li><li>Water-filled metal can with a lid for safe disposal of oil-contaminated rags and pads.</li></ul><h2 id="application-process">Application process</h2><h3 id="preparation">Preparation</h3><ol><li id="isPasted">Vacuum the floor to remove all loose debris and dirt.</li><li>Clean the floor thoroughly using <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/surface-care-spray">Surface Care Spray</a>. You may use the aid of a white buffing pad along with Surface Care Spray to help loosen stubborn dirt.</li><li>Allow the cleaned surface to dry.</li><li>Lightly scuff the cleaned wood floor with a maroon buffing pad.&#xA0;<ul><li>The outside floor perimeter gets done by hand.</li><li>The floor&apos;s field is abraded with the help of an electric buffer. For a wood floor with a textured surface, like a hand-scraped floor, you may want to back up the conditioning pad with a thick buffer pad between the driver and conditioning pad to accommodate for the uneven surface.</li></ul></li><li>Vacuum the abraded floor thoroughly.</li><li>Tack the floor with a dry mop or a water-dampened mop/rag.</li><li>Allow the tacked floor to dry completely.</li><li>If desired, prior to oiling the floor, mask the baseboards, door jambs, and cabinets with easy release painters&apos; tape to avoid getting oil on them.</li></ol><h3 id="isPasted">Damage repairs (Optional)</h3><p id="isPasted">Minor scratches and nicks where the wood is exposed are best reoiled with Oil Plus 2C during the renovation process and typically do not require more than that. Such minor blemishes (once re-oiled) become part of your floors&apos; natural patina, just like with a nice piece of leather furniture.</p><p>Significant scratches or gouges in your wood floor that are undesirable may need fixing first. If a fix is desired/required, follow the below process.</p><ol><li>Scrape and sand the damage out until flush. Sometimes a board replacement is required when the damage is too extensive.</li><li>Blend the repair area&apos;s transition with each board&apos;s grain flow pattern or sand the entire board down to bare wood, up to a natural joint.<br>IMPORTANT: Sanding must mimic the original sanding process to ensure consistent color results.</li><li>Vacuum the surface.</li><li>Clean using <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/raw-wood-cleaner">Raw Wood Cleaner</a>.</li><li>Allow to dry (approx. 15-60 minutes).</li><li>Apply <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/oil-plus-part-a-6ml">Oil Plus 2C</a> in the original color to the raw wood area. Work the oil into the wood in a circular motion using the <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/red-applicator-pad">Red Applicator Pad</a>.</li><li>Allow the oil to react for at least 5 minutes.</li><li>Start buffing excess oil away around 15 minutes from applying it using a clean <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/white-applicator-pad">White Applicator Pad</a>. Ensure all excess oil has been removed within 30 minutes of application.</li><li>Clean the outside perimeter of the repair with a clean rag, blending the repair zone.</li><li>Allow the oiled repair area to dry and cure for approximately 24-36 hours.</li><li>Lightly rub-down the oiled repair area with a piece of the maroon buffing pad. This will blend the repair area in with the rest of the previously abraded floor.</li><li>Remove all dust and proceed to overall renovation process.</li></ol><h3 id="renovation-process">Renovation process</h3><p>Applying Oil Plus 2C for a renovation is the same as the initial <a class="fr-green fr-strong" href="https://help.rubiomonocoatusa.com/en-US/how-to-apply-oil-plus-2c-to-flooring-273137" id="isPasted" style=" text-decoration: underline 1px;" title="How to apply Oil Plus 2C to flooring.">application</a>, with the exception of the spread rate. Because the wood is already mostly saturated, a renovation gets significantly better spread rates. Always aim for the lower spread rate when estimating product usage.&#xA0;</p><blockquote><strong>Caution</strong><br>Rags saturated in oil are combustible and require proper disposal. Here are some <a class="fr-green fr-strong" href="https://www.nfpa.org/-/media/Files/Public-Education/Resources/Safety-tip-sheets/OilyRagsSafetyTips.ashx">oily rags safety tips</a> from the NFPA.</blockquote><h2 id="cure-times">Cure times</h2><p>View Oil Plus 2C <a class="fr-green fr-strong" href="https://help.rubiomonocoatusa.com/oil-plus-2c-cure-times-274878">cure times</a>.</p><h2 id="tips">Tips</h2><p>To set you up for success, please review the Oil Plus 2C <a class="fr-green fr-strong" href="https://help.rubiomonocoatusa.com/oil-plus-2c-tips-274835">tips</a>.</p>

How to renovate a floor with Oil Plus 2C

<h3 id="isPasted">When to renovate</h3><p id="isPasted">A renovation with Rubio Monocoat <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/collections/oil-plus-2c" style=" text-decoration: underline 1px;" title="Oil Plus 2C Collection">Oil Plus 2C</a>, is a simple process that brings the surface back to life without requiring major sanding.</p><p>The renovation process is recommended if you need to re-introduce the original applied color. This is typically caused by not maintaining the surface properly or in the case of an accident.</p><p>Two things to keep in mind: the surface needs to be previously treated with Oil Plus 2C and there should be no deep scratches or gouges present. If this is the case, a light abrasion and re-oil will make it look like new!</p><p>A &#x201C;renovation&#x201D; is necessary when color restoration is required. If color restoration is not required, maintenance is done using <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/renew" style=" text-decoration: underline 1px;" title="Renew">Renew</a>.</p><p>For an overview of the care process, please read <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/blogs/blog/how-to-care-for-your-rubio-monocoat-finished-furniture" style=" text-decoration: underline 1px;" title="Caring for your Rubio Monocoat oil finished floor.">caring for your Rubio Monocoat oil finished furniture</a>.</p><p>Under normal circumstances, furniture that has been properly cared for should not need a renovation.</p><p>There are a couple cases though, where a renovation is required:</p><ul><li>If cleaning and/or maintenance is neglected, the protective qualities of the finish can become compromised and further use can result in loss of color.</li><li>When the recommended cleaner (<a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/surface-care-spray">Surface Care Spray</a> or properly diluted <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/soap" style=" text-decoration: underline 1px;" title="Rubio Monocoat Soap">Rubio Monocoat Soap</a>) is not used, appearance and performance issues can be expected. Both of these situations will require a &#x201C;renovation&#x201D; application using <a class="fr-strong fr-green" href="https://www.rubiomonocoatusa.com/products/oil-plus-2c-390ml" style=" text-decoration: underline 1px;" title="Oil Plus 2C">Oil Plus 2C</a> to restore the appearance and protective properties of the furniture.</li></ul><h2 id="isPasted">How a renovation works</h2><p>You may be asking yourself, doesn&#x2019;t the <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/pages/technology" style=" text-decoration: underline 1px;" title="Rubio Monocoat Technology">Rubio Monocoat Technology</a>, that prevents lap lines, mean that simply introducing more product will not work because the surface will not accept more product? And you would be correct.</p><p>The trick to the renovation process is a light abrasion that opens the initially applied Oil Plus 2C finish. This means a renovation can be performed without requiring a full-on re-sand. Once abraded and cleaned, apply Oil Plus 2C the same way as an initial <a class="fr-green fr-strong" href="https://help.rubiomonocoatusa.com/en-US/how-to-apply-oil-plus-2c-to-furniture-273135">application</a>.</p><p>During application, only the areas that require color restoration will accept color while the remaining areas will simply be refreshed in appearance and protection.</p><p>Let&#x2019;s take a closer look at the renovation process!</p><p>Consult the <a class="fr-green fr-strong" href="https://cdn.shopify.com/s/files/1/0260/4810/2497/files/Rubio_Monocoat_Oil_Plus_2C_TDS_English.pdf">TDS</a> prior to using Oil Plus 2C.&#xA0;</p><h2 id="materials-needed">Materials needed</h2><ul><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/surface-care-spray" style=" text-decoration: underline 1px;" title="Rubio Monocoat Surface Care Spray">Surface Care Spray</a> (or properly diluted <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/soap" style=" text-decoration: underline 1px;" title="Rubio Monocoat Soap">Rubio Monocoat Soap</a>)&#xA0;</li><li>Easy-release painters&#x2019; tape</li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/maroon-abrasion-pad">Maroon Abrasion Pad</a> (ScotchBrite material in 240-320 grit)</li><li>Vacuum</li><li>Gloves</li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/raw-wood-cleaner">Raw Wood Cleaner</a></li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/wide-lip-can-opener">Paint can opener</a></li><li>Mixing container</li><li>Stir stick</li><li id="isPasted"><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/applicator-set">Applicator Set</a></li><li><a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/collections/oil-plus-2c">Oil Plus 2C</a> (in the original applied color)</li><li id="isPasted">Supply of clean terry cloths/towels</li><li>Water-filled metal can with a lid for safe disposal of oil-contaminated rags and pads.</li></ul><h2 id="isPasted">Video</h2><p><span contenteditable="false" draggable="true" class="fr-video fr-deletable fr-rv fr-fvc fr-dvb fr-draggable"><iframe width="100%" src="https://www.youtube.com/embed/OvxBixwPnhE?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe></span><br></p><h2 id="application-process">Application process</h2><h3 id="preparation">Preparation</h3><ol><li id="isPasted">Vacuum the surface to remove all loose debris and dirt.</li><li>Clean the surface thoroughly using <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/surface-care-spray">Surface Care Spray</a>.</li><li>Allow the cleaned surface to dry.</li><li>Lightly scuff the cleaned wood surface with a<a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/maroon-abrasion-pad">&#xA0;Maroon Abrasion Pad</a>.<img src="https://attachments.gorgias.help/JWE4j730RJxZlV9b/hc/DrQqY7XG5g2L4Wjv/2024072416-753cff3c-3c37-4032-b733-bd56aea6b0b7-abrading_a_bar_top_using_a_maroon_pad.jpg" class="fr-fic fr-dii fr-rounded"><ul><li>Using the maroon pad, abrade the surface along the length of the grain. When the pad gets filled with dust, clean/shake it and keep using it. A maroon pad is equivalent to approx. 320 grit sandpaper. Though 320 sandpaper and a maroon pad are roughly equivalent grit, it&#x2019;s easier to use a maroon pad than sandpaper when doing this process by hand due to the softness of the maroon pad. Sandpaper is paper thin and the pressure from the fingers may transfer to the surface.&#xA0;</li></ul></li><li>Vacuum the abraded surface thoroughly.<ul><li>Do a visual check to make sure you have not missed a spot and/or that you abraded too much in a particular area. It&#x2019;s important to do an even abrasion. &#xA0;</li></ul></li><li>Clean the surface with a damp cloth and allow it to dry completely.<img src="https://attachments.gorgias.help/JWE4j730RJxZlV9b/hc/DrQqY7XG5g2L4Wjv/2024072416-ab5e9976-67f3-4ab8-868a-335aadd53077-wiping_down_a_recently_abraded_bar_top.jpg" class="fr-fic fr-dii fr-rounded"></li><li>If desired, prior to oiling the surface, tape any area that will not be finished.<img src="https://attachments.gorgias.help/JWE4j730RJxZlV9b/hc/DrQqY7XG5g2L4Wjv/2024072416-4f5bef99-4702-4f05-b006-2fdfd5962eb4-taping_off_the_surrounding_materials_in_preparation_to_renovate_a_bar_top.jpg" class="fr-fic fr-dii fr-rounded"></li></ol><h3 id="isPasted">Damage repairs (Optional)</h3><p id="isPasted">Minor scratches and nicks where the wood is exposed are best reoiled with Oil Plus 2C during the renovation process and typically do not require more than that. Such minor blemishes (once re-oiled) become part of your furniture&apos;s natural patina, just like with a nice piece of leather furniture.</p><p>Significant scratches or gouges in your wood surface that are undesirable may need fixing first. If a fix is desired/required, follow the below process.</p><ol><li>Scrape and sand the damage out until flush.</li><li>Blend the repair area&apos;s transition with each board&apos;s grain flow pattern or sand the entire board down to bare wood, up to a natural joint.<br>IMPORTANT: Sanding must mimic the original sanding process to ensure consistent color results.</li><li>Vacuum the surface.</li><li>Clean using <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/raw-wood-cleaner">Raw Wood Cleaner</a>.</li><li>Allow to dry (approx. 15-60 minutes).</li><li>Apply <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/oil-plus-part-a-6ml">Oil Plus 2C</a> in the original color to the raw wood area. Work the oil into the wood in a circular motion using the Rubio Monocoat <a class="fr-green fr-strong" href="https://www.rubiomonocoatusa.com/products/applicator-set">Applicator Set</a>.</li><li>Allow the oil to react for at least 5 minutes.</li><li>Remove all excess oil from the wood surface with a dry rag within 30 minutes.</li><li>Clean the outside perimeter of the repair with a clean rag, blending the repair zone.</li><li>Allow the oiled repair area to dry and cure for approximately 24-36 hours.</li><li>Lightly rub down the oiled repair area with a piece of the maroon abrasion pad. This will blend the repair area in with the rest of the previously abraded floor.</li><li>Remove all dust and proceed to the overall renovation process.</li></ol><h3 id="renovation-process">Renovation process</h3><p>Applying Oil Plus 2C for a renovation is the same as the initial <a class="fr-green fr-strong" href="https://help.rubiomonocoatusa.com/en-US/how-to-apply-oil-plus-2c-to-furniture-273135">application</a>, with the exception of the spread rate. Because the wood is already mostly saturated, a renovation gets significantly better spread rates. Always aim for the lower spread rate when estimating product usage.&#xA0;</p><p><span class="fr-img-caption fr-fic fr-dii fr-rounded" style="width: 682px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/JWE4j730RJxZlV9b/hc/DrQqY7XG5g2L4Wjv/2024072416-c56d53d5-f7bb-4f83-a5e8-1edb365e8f16-applying_oil_plus_2c_to_a_bar_top.jpg" class="fr-fic fr-dii fr-rounded"><span class="fr-inner">Apply Oil Plus 2C and allow to react.</span></span></span></p><p><span class="fr-img-caption fr-fic fr-dii fr-rounded" style="width: 682px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/JWE4j730RJxZlV9b/hc/DrQqY7XG5g2L4Wjv/2024072416-25a8b4a9-321f-46de-8c77-c212179f89ef-removing_the_excess_of_oil_plus_2c_from_a_bar_top.jpg" class="fr-fic fr-dii"><span class="fr-inner">Remove the excess oil with a clean towel.</span></span></span></p><p><span class="fr-img-caption fr-fic fr-dii fr-rounded" style="width: 682px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/JWE4j730RJxZlV9b/hc/DrQqY7XG5g2L4Wjv/2024072416-6288def4-01cc-42e3-8528-04fbba53efa4-a_renovated_countertop_using_oil_plus_2c%20(1).jpg" class="fr-fic fr-dii"><span class="fr-inner">Allow the renovated surface to cure.</span></span></span></p><blockquote><strong>Caution</strong><br>Rags saturated in oil are combustible and require proper disposal. Here are some <a class="fr-green fr-strong" href="https://www.nfpa.org/-/media/Files/Public-Education/Resources/Safety-tip-sheets/OilyRagsSafetyTips.ashx">oily rags safety tips</a> from the NFPA.</blockquote><h2 id="cure-times">Cure times</h2><p>View Oil Plus 2C <a class="fr-green fr-strong" href="https://help.rubiomonocoatusa.com/oil-plus-2c-cure-times-274878">cure times</a>.</p><h2 id="tips">Tips</h2><p>To set you up for success, please review the Oil Plus 2C <a class="fr-green fr-strong" href="https://help.rubiomonocoatusa.com/oil-plus-2c-tips-274835">tips</a>.</p>

How to renovate furniture with Oil Plus 2C

Renew a surface finished with Oil Plus 2C to a newly oiled state.

Renew

Remove black spots and stains from wood caused by alkaline reactions to the tannin that is naturally found in wood.

Tannin Remover

Localized refreshment of an Oil Plus 2C finished surface.

Refresh Eco

Main website

Rubio Monocoat USA

Maintain the appearance and optimal functionality of oiled wood surfaces.

Interior Maintenance Instructions

Interior

Maintenance

How to use Raw Wood Cleaner on wood flooring

How to use Raw Wood Cleaner on furniture

Raw Wood Cleaner coverage

Is Raw Wood Cleaner necessary before applying Oil Plus 2C?

How long should I wait after using Raw Wood Cleaner before applying Oil Plus 2C?

Can I use Raw Wood Cleaner to clean my tools and brushes?

Do I use Raw Wood Cleaner before or after water popping the wood surface?

Is Raw Wood Cleaner 0% VOC?

I don't have Raw Wood Cleaner, what else can I use to tac or clean the wood surface?

Raw Wood Cleaner

How to use Woodfiller Quick

What color of Woodfiller Quick should I use?

How wide of a gap can I fill with Woodfiller Quick?

Will the Oil Plus 2C bond with the Woodfiller quick?

Can Woodfiller Quick be used as a grain filler?

Is Woodfiller Quick meant to go on before or after Oil Plus 2C?

Is Woodfiller Quick recommended for flooring?

Can I use a different woodfiller instead of Woodfiller Quick?

Can I use Woodfiller Quick for an exterior project?

Can I use Woodfiller Quick for knots and voids?

Woodfiller Quick

Preparation

How to apply Pre-Aging to wood flooring

How to apply Pre-Aging to wood furniture

Pre-Aging coverage

Pre-Aging tips

Does Pre-Aging work on any wood species?

Is Pre-Aging a reactive stain?

Can I mix colors of Pre-Aging?

Can I dilute Pre-Aging?

Do I need to put a finish over Pre-Aging?

Does Pre-Aging raise the wood grain?

Does Pre-Aging work on veneer?

Can I use any finish over Pre-Aging?

Can I mix Pre-Aging with Precolor Easy?

Pre-Aging

How to apply Precolor Easy to flooring

How to apply Precolor Easy to furniture

Precolor Easy tips

Precolor Easy coverage

Can I dilute Precolor Easy?

Can I mix Precolor Easy with Oil Plus 2C?

Do I really need to tape off floors in sections to apply Precolor Easy?

Can I apply Precolor Easy with a floor buffer or carpet pad?

Can you get lap lines with Precolor Easy?

Can I use Precolor Easy on veneer?

What is the shelf life for Precolor Easy?

Can I apply more than 1 coat of Precolor Easy?

How long should I wait after applying Precolor Easy before I apply Oil Plus 2C?

Can I apply Precolor Easy over Pre-Aging?

Is Precolor Easy food safe?

Is the application process for Precolor Easy the same as Oil Plus 2C?

Can I mix colors of Precolor Easy to create a custom color?

Is Precolor Easy GREENGUARD Gold Certified like Oil Plus 2C?

Precolor Easy

How to apply Fumed to flooring

How to apply Fumed to furniture

Can I use Fumed on any wood species?

Is it necessary to neutralize Fumed with water after applying Fumed?

Can I dilute Fumed to lessen the greying effect?

What product do I use to finish or seal the wood surface after applying Fumed?

If I like the color of the wood after applying Fumed, how do I keep that color when I apply Oil Plus 2C?

What is the difference between Fumed and Pre-Aging?

Can I use Fumed on exterior wood?

Fumed

Pretreatment

How to apply Oil Plus 2C to flooring

How to apply Oil Plus 2C to furniture

Oil Plus 2C cure times

Oil Plus 2C coverage

Oil Plus 2C tips

Does Oil Plus 2C have a clear or non-pigmented option?

Does Oil Plus 2C work on all species?

How long does Oil Plus 2C last?

Do I have to use multiple coats for certain species of wood?

Is Oil Plus 2C food safe?

Is Oil Plus 2C really 0% VOC?

Can I use Oil Plus 2C over existing stain or finish?

Can I put lacquer, polyurethane, or other topcoat over Oil Plus 2C finish?

Does Oil Plus 2C require a topcoat?

How soon can I apply Oil Plus 2C after water-popping?

Can I cover wood floors after they have been finished with Oil Plus 2C oil?

How long do I have to wait to walk on wood floors after applying Oil Plus 2C?

What type of color options does Oil Plus 2C come in?

How often should I clean my floor?

How do I clean Rubio Monocoat floors or wood surfaces?

What is the best way to choose a color for my project?

Can I use mineral spirits before applying Oil Plus 2C?

Is Oil Plus 2C recommended for exterior?

Can I use a different stain underneath Oil Plus 2C?

Can I mix Oil Plus 2C colors to create a custom color?

How do I change the color of my finish after applying oil Plus 2C?

Can I use Oil Plus 2C over epoxy?

Is Oil Plus 2C safe to use on cutting boards?

Can I use grainfiller before applying Oil Plus 2C?

What is the difference between the color "Natural" and "Pure"?

After applying Oil Plus 2C the color around the perimeter of the floor looks different. What is causing this?

How many coats of Oil Plus 2C are required?

Can I use tape on the wood surface after applying Oil Plus 2C?

How can I add more sheen?

What sanding grit do I sand to for Oil Plus 2C?

How do I mix Oil Plus 2C

Oil Plus 2C

Protection

How to apply SheenPlus to flooring

How to apply SheenPlus to furniture

SheenPlus cure times

SheenPlus tips

SheenPlus maintenance

SheenPlus coverage

Can I apply SheenPlus over DuroGrit or Hybrid Wood Protector to get more sheen for my exterior project?

How long does it take for Sheen Plus to cure?

When can I start walking on my floor or using the wood surface after I apply SheenPlus?

What is the shelf life for SheenPlus?

Is the Part B (Accelerator) for SheenPlus the same as the accelerator for Oil Plus 2C?

How long does SheenPlus last before it needs a maintenance coat?

How do I know when it is time for a maintenance coat with SheenPlus?

Can I use SheenPlus Part A only?

Can SheenPlus be applied on raw wood?

Can SheenPlus be applied over Universal Maintenance Oil or Refresh Eco?

How soon can I apply SheenPlus after Oil Plus 2C has been applied?

Will applying multiple layers of SheenPlus increase the sheen level?

What application pads can I use to apply SheenPlus?

What sheen options are available for interior wood protection?

Can I apply SheenPlus over an old application of Oil Plus 2C?

SheenPlus

How to apply Universal Maintenance Oil to flooring

How to apply Universal Maintenance Oil to furniture

Universal Maintenance Oil cure times

Universal Maintenance Oil tips

Universal Maintenance Oil coverage

Can I apply Universal Maintenance Oil over DuroGrit or Hybrid Wood Protector to get more sheen for my exterior project?

When can I start walking on my floor or using the wood surface after I apply Universal Maintenance Oil ?

What is the shelf life for Universal Maintenance Oil ?

How long does Universal Maintenance Oil last before it needs a maintenance coat?

How do I know when it is time for a maintenance application of Universal Maintenance Oil ?

How soon after applying Oil Plus 2C can I apply Universal Maintenance Oil?

How much does Universal Maintenance Oil increase the sheen?

Which color of Universal Maintenance Oil should I use?

Universal Maintenance Oil

Sheen Enhancers

What's the difference between Soap and Surface Care Spray?

Can I use other cleaners besides Surface Care Spray or Universal Soap?

What is the correct ratio of Soap to water to make the cleaning solution?

Soap or Surface Care Spray

Cleaning

How to apply Renew to flooring

Renew cure times

Renew coverage

Can I use Renew to treat scratches?

Will Renew fix water spots?

Can I do a spot treatment with Renew or do I need to apply it over the full surface?

Can I use Renew over any color of Oil Plus 2C?

What is the difference between Renew and Universal Maintenance Oil?

Can I use Renew over Universal Maintenance Oil or SheenPlus?

Is Renew 0% VOC?

How to use Tannin Remover

Can I use Tannin Remover to get rid of grey or black stains on the wood surface?

Will Tannin Remover get rid of any stain?

How long should I let Tannin Remover soak before wiping the wood surface clean?

Can I do more than 1 treatment of Tannin Remover?

Can I use Tannin Remover on a floor or wood surface that has been treated with a reactive stain like Fumed?

How can I tell if a stain is a tannin stain?

How to use Refresh Eco

Can I use Refresh Eco on floors?

Does Refresh Eco add protection to the wood surface?

How to use Exterior Wood Cleaner on decking

How to use Exterior Wood Cleaner on siding

How to use Exterior Wood Cleaner on doors

How to use Exterior Wood Cleaner on furniture

Exterior Wood Cleaner tips

Exterior Wood Cleaner coverage

Do I need to use Exterior Wood Cleaner before applying DuroGrit or Hybrid Wood Protector to fresh lumber?